Traps and accesories

WATER TRAP

Specific trap for monitoring and mass trapping.

Specific trap for monitoring and management by Tuta absoluta mass trapping and other moths, basically in horticultural crops.

 
 
CHARACTERISTICS:
  • Red rigid plastic, with pheromone's deposit in the centre of the trap.
  • Automatic water level control because of the different pressures.
  • Elevation possibility by inferior shoot 
  • Anchoring the pipette drip irrigation
  • Manufactured by SANSAN PRODESIGN S.L. Made in Spain.
    
THE METHOD OF USE:
  • Place a pheromone dispenser in the deposit, provided for that purpose, in the centre of the trap.
  • Place the traps at 20-40 cm from the floor, over a support or a shoot, and distribute them unifromly through the parcel or greenhouse.
  • Refill the water until the drain level and add some oil drops to reduce the superficial water pressure and avoid its evaporation.
  • If you wish, anchor the pipette drop irrigation.
Trap densities:
  • 20-40 traps/Ha. In Greenhouse, place a trap every 300 to 500 m2, with a minimum of 2 traps/greenhouse
 
Presentations:

TWASNS0001   Water trap - Boxes 15 units.

 

These indications are a general guide, and aim to provide the user a starting point for the implementation of his monitoring and/or mass trapping programs. The conditions and local practices can develop the need of programs' personalization.

       

       A-QUALITY POLITICS

Search

Quick guide